How about acrylic materials? 6 methods to identify the quality of acrylic materials.

Acrylic materials, many people do not know, compared with traditional ceramic materials, acrylic in addition to unparalleled high brightness, but also has the following advantages: good toughness, not easy to break, repairability, as long as soft foam point toothpaste You can wipe the sanitary ware freshly; the texture is soft, and there is no cold and chilly feeling in winter; the color is bright, which can satisfy the personality pursuit of different tastes. Here are some ways to judge the quality of acrylic materials, so that everyone can identify them later.

1.the first is the observation method: this is judged according to the characteristics of the material of the acrylic itself. When purchasing, observe whether the board has serious fading or low gloss and not transparent. If it exists, the quality of acrylic is not good. Another simple observation method is: that is, the manual of the Biakli, see whether the manual and the actual situation of the acrylic sheet are consistent, if the inconsistency is found, the acrylic sheet can be roughly judged to be irregular.

2.the second is the light transmission method: the principle is that the light transmittance of the acrylic is extremely high and the light after the transmission is white light, which does not absorb the recognition method derived from the light color, and can transmit the white light through the light. Acrylic, if you find yellow or blue color, it means that the quality of acrylic is not a defective product.

3.the third is the hot melt method: also called the paste method, the principle is to use the good acrylic sheet and the secondary acrylic sheet of the paste is not the same to distinguish. Acrylic sheets of lower quality are more difficult to separate after being melted together, and good quality acrylic sheets are easily separated.

4.the fourth is the combustion method: you can use small pieces of acrylic sheet for combustion experiments, if the acrylic sheet is quickly burned, it means that the quality of the sub-product acrylic is not good.

5.the fifth is the packaging method: the soft plastic edge of the good quality acrylic material is very good, the soft rubber edge of the defective acrylic sheet looks very miscellaneous. In the industry, this material is called a joint venture sheet. Of course, good quality acrylic sheets are definitely more expensive than quality acrylic sheets.

6.the sixth is the touch method: when choosing materials, you should also look at color, pores, thickness and so on. The surface is bright and the hand feels sticky. Look carefully at the surface without small pores. If there is lime on the surface, there will be some small pores in the fine view. Such materials contain more calcium and have poor toughness. Experts do not recommend it!

We specialized in customizing acrylic display stands, acrylic display case, acrylic brochure holder, acrylic side table, acrylic display block and other acrylic products, welcome to contact us!